§571.5 Matter incorporated by reference.
(a) Incorporation. There are hereby incorporated, by reference, into this part, all materials referred to in any standard in Subpart B of this part that are not set forth in full in the standard. These materials are thereby made part of this regulation. The Director of the Federal Register has approved the materials incorporated by reference. For materials subject to change, only the specific version approved by the Director of the Federal Register and specified in the standard are incorporated. A notice of any change in these materials will be published in the Federal Register. As a convenience to the reader, the materials incorporated by reference are listed in the Finding Aid Table found at the end of this volume of the Code of Federal Regulations.
(b) Availability. The materials incorporated by reference, other than acts of Congress and matter published elsewhere in the Federal Register, are available as follows:
(b)(1) Standards of the Society of
Automotive Engineers (SAE). They are published by the Society of Automotive Engineers, Inc. Information and copies may be
obtained by writing to: Society of Automotive Engineers, Inc.,
(b)(2) Standards of the American Society for Testing and Materials (ASTM).
They are published by the American Society for Testing and Materials.
Information and copies may be obtained by writing to: ASTM International,
(b)(3) Standards of
the American National Standards Institute (ANSI). They are published by the
American National Standards Institute. Information and copies may be obtained
by writing to: RESNA,
(b)(4) Data on the
Weight Height and Selected Body Dimensions of Adults. They are published by
the
(b)(5) Test Methods
of the American Association of Textile Chemists and Colorists (AATCC). They
are published by the American Association of Textile Chemists and Colorists.
Information and copies may be obtained by writing to: AATCC,
(b)(6) Test methods
of the Illuminating Engineering Society of
(b)(7) Standards of Suppliers of Advanced
Composite Materials Association (SACMA). They are published by Suppliers of
Advanced Composite Materials Association. Information and copies may be
obtained by writing to: Suppliers of Advanced Composite Materials Association,
(b)(8) Standards of the American Society of
Mechanical Engineers (ASME). They are published by the American Society of
Mechanical Engineers. Information and copies may be obtained by writing to:
ASME,
(b)(9) Regulations of the United Nations Economic Commission for
10) Child
Restraint Systems Seat Assembly Drawing Package. Copies may be obtained by
contacting: Leet-Melbrook,
(b)(11) All of the above materials, as well as any other materials
incorporated by reference, are available for inspection and copying at the
Office of Vehicle Safety Standards, National Highway Traffic Safety
Administration,
[33 FR 19704,