FMCSA SECURITY AWARENESS TRAINING

This course will take approximately 1-2 hours to complete. You must complete the presentation from beginning to end in order to receive credit for viewing this course. This training must be completed by June 30th, 2005.

Please note the following instructions:

You are about to view Federal Information Systems Security Awareness course.
If you are unfamiliar with the design and navigation of this course, click on “Launch Guided Tour” to view a short tutorial.
To start the training, click on “Launch Federal Information Systems Security Awareness”.
If you use assistive technology select "Launch text only version".
Once you have completed the training, you will go back to the main page and double-click on "Launch Certification Test".
This test will re-cap the content of the training you just completed.

Step 1:   Launch Guided Tour  (if unfamiliar with the navigation of this training)

Step 2:   Launch Federal Information Systems Security Awareness

Step 2a:Launch text only version  (only if you use assistive technology)

Step 3:  Launch Certification Test (Test questions about the security training content)

Step 4:  You're done!

To view the course at full screen 800x600 pixels

1. Click on the “START” button in the lower left corner of the screen. Then click “Settings” and “Control Panel”.

2. In the Control Panel window, double-click on the “Display” icon to open it.

3. In the Display Properties dialog box, click on the tab titled “Settings”.

4. In the section titled “Screen Area”, click on the slider and drag it until “800 by 600 pixels” appears.

5. Click the OK button to accept your change. You may be required to reboot your system for the changes to take affect.