|
|
|
Appendix B: References
|
|
|
Print  
|
|
- "Tracking the Trailer," by Thomas Strah, Transport Topics, I-Tech Supplement, February 21, 2005, p. 5.
- Hazardous Materials Safety and Security Technology Field Operational Test (FOT) Evaluation Final Report Documents:
- Volume I: Executive Summary, for the Federal Motor Carrier Safety Administration, issued 11/11/04.
- Volume II: Evaluation Final Report Synthesis, for the Federal Motor Carrier Safety Administration, issued 11/11/04.
- Untethered Trailer Tracking and Control System Operational Requirements for the Federal Motor Carrier Safety Administration, Document, 3/23/04.
Interim Reports with Proprietary Information- Untethered Trailer Tracking and Control System Concept of Operations for the Federal Motor Carrier Safety Administration, 12/23/03.
- Untethered Trailer Tracking and Control System System Design Document for the Federal Motor Carrier Safety Administration, 6/24/04.
- Untethered Trailer Tracking and Control System Pilot and Evaluation Test Plan Document for the Federal Motor Carrier Safety Administration, 9/15/04.
- Hazardous Materials Safety and Security Technology FOT Evaluation Final Report Document:
- Volume III: Evaluation Final Report Detail, for the Federal Motor Carrier Safety Administration, 11/11/04.
Supporting Technical Standards DocumentsTable 14 lists the applicable technical standards documents used to support the UTT system project.
Table 14: Applicable Technical Standards Documents
| Document Number/Name | Description |
|---|
| MIL-HDBK-237B | Electromagnetic Compatibility Management Guide for Platforms, Systems, and Equipment | | MIL-HDBK-240 | Hazards of Electromagnetic Radiation to Ordnance Test Guide | | MIL-STD-464 | Interface Standard Electromagnetic Environmental Effects Requirements for Systems | | SAE J560 | Seven Conductor Electrical Connector for Truck-Trailer Jumper Cable | | MIL-STD-810E | Environmental Engineering Considerations and Laboratory Tests | | TMC RP 2401 | Recommended Practice, Trailer Tracking Interface Standard | | SAE J1708 | Serial Data Communications Between Microcomputer Systems in Heavy-Duty Vehicle Applications | | JDQ 53.2 | John Deere Standard: Environmental Design & Testing of Electronic & Electrical Components | | SAE J1455 | Joint SAE/TMC Recommended Environmental Practices for Electronic Equipment Design (Heavy-Duty Trucks) | | SAE J1113-13 | Electromagnetic Compatibility Measurement Procedure for Vehicle Components | Previous | Next
|
|
|
|